Internet’s physician

When our daily energy requirements are met by ‘Green Energy’, then we are using resources such as wind, tides or geothermal heat. They are thought to be ‘Green’ due to the fact that they are easily restored and natural. When considering elements such as Wind Power and Windmills, in many cases we are looking back at the history of energy production. This idea is preserved by the use of technology, eco-efficient options and planet friendly alternatives.

In the home environment, one can see examples such as Solar Thermal and Solar Water Heating Collectors. Moving on from this there are the Photovoltaic Panels (PV’s) which can generate electricity from your roof. Equally important is that of Biomass Energy – which includes Stoves, Fuel, Pellets and Boilers burning Wood. We now also have Ground Source Heat Pumps – which draw out the heat left by the Sun. Not all ‘Green Energy’ is new – by considering Wind Power and Hydropower we are looking at some of the oldest forms of energy production.

Thermal Energy Systems: This technology is based around two core types of system. Firstly, there are elements that absorb energy from the sun and create hot water – known as Solar Water Heating Collectors. Added to this is the generation of electricity from solar radiation – known as Photovoltaism, or more commonly Solar Electrical panels. To get the best results these panels need to be south facing at an angle of around 30 degrees from horizontal, and away from blockages.

Within Solar Energy overall, Solar Water Power is most commonly used in the UK. With the capacity to deliver 50 percent plus of a household’s hot water requirement annually, Solar Water heating systems are crucial to energy in the UK. Typically, to fit this type of equipment will cost between 500 and 1500 pounds for a DIY kit – all the way up to 2-5k for a full professional fitting.

Biomass Energy Systems – Including all natural energy forms derived from plant and animal products – such as wood, straw, poultry litter and ‘energy crops’. It is extremely useful – in that it can produce a range of power sources, including heat and electricity. Indeed, within the European Markets, the UK has some of the leading levels of Biomass material at hand. Considering all this, and the relative lack of C02 produced, makes the whole process highly green overall. Because the system often involves one tree being planted as another is felled, many wood crops are deemed to be sustainable sources.

By the growth of Short Rotation Crops (SRC), the UK is able to maximise the ‘Energy Crops’ return overall. Of equal importance is the ability to produce dry matter – and perennial grasses are very good for this. Of equal importance, although maybe less well known, are Municipal and Agricultural Waste. One natural offshoot of agricultural work is Agricultural Waste. Because it comes from food or wood, Municipal Waste is also considered a useful biomass product.

Systems Using Geo-Thermal Energy – Used in the generation of both warm water and electricity, this energy mainly comes from the Sun and heats the Earth. By using the ground source temperature of approximately 12 degrees, we can either heat or cool buildings within the UK. Generally, items such as Heat Pumps are thought of as very effective, as they produce four units of energy for every one that is used for generation. A greater return of energy (sometimes almost 100 percent) is produced – because heat source pumps can operate in-line with wind turbines and solar electrical panels.

Systems Based On Wind Energy: When you consider the milling of grain and pumping of water, it is easy to see how long wind energy has been with us. Whether to your home or to a local grid, when the energy has been generated it must be delivered to a point of usage – and cannot be stored. To be fair, the UK has the highest level of wind generation within Europe. It is interesting to note that whilst we can produce 10 percent of our entire power requirement from wind power, at present we only produce 1 percent. Rather than electricity production running at 2-10 p per kWh, it could be run at 2p per kWh. Therefore, recovery of cost takes approximately 6-9 months overall.

Finally, we have Hydropower; an area in which the UK does well within Europe. The ability to utilise energy from moving water, much like wind power, has been going on for thousands of years. It is this type of energy production that could meet 2 percent of all the UK’s demand.

By using a turbine, a Hydropower system can transfer the kinetic energy of moving water into another form. Turbines use either a water drop (e.g. through a dam) or by a natural ‘run of the river’ – thereby having no water storage reservoir. ‘Micro-Hydro’ however utilises old outdated sluices and dams. Although a lesser known form of electricity output, this process could supply 200mW of UK demand. The expected cost of installing a system such as this would be between 200 pounds and 3k per kW of output.

It can be seen that the route to ‘Green Energy’ is growing considerably, especially in light of the need for increasing energy outputs throughout the Western World. The UK domestic market appears to be one of the core beneficiaries of this technology.

Electricians and Plumbers in particular are expected to provide the main thrust of domestic installation expertise. With ‘Green Energy’ rising up the political agenda in Europe, a range of financial aids and grants are becoming available. This is a new industry – but getting the right certification can only improve job security and opportunities for the future. Electrical or plumbing training that incorporates green technology could be very useful for the future.

(C) S. Edwards 2009. Visit Renewable Energy Certification or electricianscourse.co.uk/GreenEngineerCertification.html.